Go To HOME

Your computer and telephone systems are under constant attack. Power lines conduct more than the electricity that run your systems. They also carry electrical disturbances that can disrupt, degrade, and destroy your systems. This leads to soft failures (lock-ups, error messages, system restarts) and hard failures (board replacements, component failures) which can ultimately shut down your system and wreak havoc on your business operations.

The occasional lightning strike is an obvious example, but everyday high-frequency interference, while less dramatic, can be equally devastating. Caused by utility grid switching as well as elevators, HVAC units, copiers, and other equipment loads on building power lines, these constant power line disturbances can cause system lock-ups and component failure which leads to downtime and lost productivity

ONEAC APPLICATION & LOAD CONFIGURATOR

SINGLE PHASE

THREE PHASE

POWER CONDITIONED

NON POWER CONDITIONED

 



ONEAC conditioned UPSs provide battery backup to allow uninterrupted service or controlled system shutdown in the event of a power outage. Plus, they include ONEAC power conditioning to eliminate power line contaminants for improved system reliability. Intelligent network management and automated shutdown can also be added with ONEAC connectivity software and accessories
 ONEAC POWER CONDITIONED UPS'S - LINE INTERACTIVE

ONePlus Series Power Conditioned UPS Icon

Specification Sheet

 

ONePlus Series Power Conditioned UPS The ONEAC ONePlus Series UPS is available for 120 V environments in models from 250 to 1000 VA. The ONePlus family features a line-interactive topology, transformer-based power conditioning and ONEAC's patented ONEGround technology to protect against ground skew problems. Featuring both USB and Serial communications ports, ONePlus supports Basic & Advanced communications and includes MopUPS Express Software for data logging and controlled shutdown of Windows-based operating systems.  ONEAC APPLICATION & LOAD CONFIGURATOR

ONe250 $399
ONe400 $549
ONe600 $699
ONe1000 $969

ONEAC PART #

ONE254AG-SE ONE404AG-SE ONE604AG-SE ONE1004AG-SE

Max. Cap Volts/Amps

250 / 167 400 / 268 600 / 402 1000 / 670

Batteries

(1) 7AH (1) 9AH (2) 7AH (3) 7AH

Typical Runtime by system load half load/full load (min)

22 / 8 12 / 5 20 / 5 18 / 5

Max. Dimensions HxWxD (inches)

7.1 x 5.5 x 14.3 7.1 x 5.5 x 15.4 9.3 x 7.1 x 15.0 9.3 x 7.1 x 15.0
18 x 14 x 36.2 18 x 14 x 39 23.5 x 18 x 38 23.5 x 18 x 38

Shipping

28 lbs 29 lbs 57 lbs 63 lbs

 

 

 ONEAC SINGLE-PHASE POWER CONDITIONERS
ConditionOne® Series are available in 120/230 V, 50/60 Hz from 75 to 1000 VA (single-phase). The ConditionOne Series features an isolation transformer for premium power conditioning. Optional OneGround technology is available to correct ground skew problems

Specification Sheet

ONEAC PART #

VA Rating    /  AMPS

PRICE

PC075A-S2S 75 0.6
$195
PC120A-S2S 120 1.0
$275

PC180A-S2S 180 1.5
$315
PC240A-S2S 240 2.0
$355
PC240A-S4S 240 2.0
$375

ONEAC APPLICATION & LOAD CONFIGURATOR 

PC360A-S4S 360 2.0
$455
PC550A-S4S 540 4.6
$575
PC750A-S4S 750 6.2
$755
PC1000A-S4S 1000 8.4
$885

 

OTHER POWER CONDITIONERS

ConditionOne SINGE PHASE PC THREE PHASE

  

    Web Design by: SlickClickAll rights reserved 1999-2016 

  Counter